Online Courses for New Mexico

Study online, 24/7, at your own pace!

Online Electrical Courses for New Mexico

Now you can study online, 24/7, at your own pace!

 

At Bobo Technologies we realize that as an electrical industry professional, balancing work, family and, well, just life, can be challenging. Our online electrical courses for Colorado are designed to give you the flexibility that you need to study for your license renewal or upgrade.

The following online electrical courses are approved for New Mexico Continuing Education:

  • REGISTER HERE – NEC 2020 Code Changes, Grounding and Bonding and, Wiring Methods – 16 Hours Continuing Education – $139
  • REGISTER HERE – NEC 2020 Code Changes and Grounding & Bonding – 8 Hours Continuing Education – $79
  • REGISTER HERE – NEC 2020 Wiring Methods – 8 Hours Continuing Education – $79
  • REGISTER HERE – NEC 2020 Wiring Methods and Theory – 16 Hours Continuing Education – $139
  • REGISTER HERE – NEC 2020 Electrical Theory – 8 Hours Continuing Education – $79

NEC 2020 courses ARE APPROVED by New Mexico for license renewal in 2023.

Our online courses are hosted by Digital Chalk. PLEASE READ THE FOLLOWING for the best experience possible.

Courses are presented in 1-hour Elements. If you step away from training there will be an “are you still there?” prompt every 5 minutes, you have 3 minutes to respond.

If you do not respond, training will end and you must start that Element over. If you need to step away from training, be sure to exit the Element. When you return, minutes, hours or days later, you can pick up right where you left off!

For more course details, see below.

NEC 2020 Code Changes, Grounding & Bonding and, Wiring Methods – $139

(16 Hour Continuing Education Course)

 

NEC 2020 Code Changes, Grounding & Bonding and, Wiring Methods  is designed to meet 16 hours of Continuing Education Units (CEUs) requirement for Continuing Competency for electrical licenses in New Mexico.

The course curriculum covers:

  • NEC 2020 Overview and Definitions
  • Conductor Ampacity and Derating
  • Sizing Overcurrent Devices and Conductors
  • Conduit and Tubing Fill
  • Wireways
  • Sizing Junction Boxes
  • Sizing Pull Boxes

  • NEC 2020 Changes in Chapters
  • Sizing Grounded Conductor and Grounding Electrode Conductor for Services and Separately Derived Systems
  • Sizing Main and System Bonding Jumpers
  • Sizing Supply-Side Bonding Jumpers
  • Sizing Equipment Bonding Jumpers on Load Side of an Overcurrent Device

Combined NEC 2020 Code Changes and NEC 2020 Grounding & Bonding IS HERE!!! – $79*

(8 Hour Continuing Education Course)

 

We have combined these two courses for your convenience. Together these courses are designed to give you 8 HOURS of Continuing Education for your New Mexico license renewal in 2023. This course combines:

    1. NEC 2020 Changes – 4 hours of Continuing Education and
    2. NEC 2020 Grounding and Bonding – 4 hours of Continuing Education

The course curriculum covers:

  • 2020 NEC Changes
  • Sizing Grounded Conductor and Grounding Electrode Conductor for Services and Separately Derived Systems
  • Sizing Main and System Bonding Jumpers
  • Sizing Supply-Side Bonding Jumpers
  • Sizing Equipment Bonding Jumpers on Load Side of an Overcurrent Device.

NEC 2020 NEC Wiring Methods – $79*

(8 Hour Continuing Education Course)

 

NEC 2020 Wiring Methods is designed to meet the 8 hours of Continuing Education Units (CEUs) requirement for Continuing Competency for electrical licenses in New Mexico.

The course curriculum covers:

  • NEC 2020 Overview and Definitions
  • Conductor Ampacity and Derating
  • Sizing Overcurrent Devices and Conductors
  • Conduit and Tubing Fill

  • Wireways
  • Sizing Junction Boxes
  • Sizing Pull Boxes

NEC 2020 NEC Wiring Methods and Theory – $139*

(16 Hour Continuing Education Course)

 

NEC 2020 Wiring Methods and Electrical Theory is designed to meet the 16 hours of Continuing Education Units (CEUs) requirement for electrical license renewal in New Mexico and many other states. Includes practice review questions and answers.

The course curriculum covers:

  • NEC 2020 Overview and Definitions
  • Conductor Ampacity and Derating
  • Sizing Overcurrent Devices and Conductors
  • Conduit and Tubing Fill
  • Wireways
  • Sizing Junction Boxes
  • Sizing Pull Boxes
  • Ohm’s Law and Voltage Drop
  • General Lighting and Receptacle Calculations
  • Range and Dryer Calculations
  • Fixed Appliance Calculations
  • Sizing Grounding Conductors
  • Motro Calculations
  • Generator Calculations
  • Welder Calculations
  • Transformer Formulas & Calculations
  • Miscellaneous Commercial Calculations
  • Residential Service Calculations

NEC 2020 Electrical Theory – $79*

(8 Hour Continuing Education Course)

 

NEC 2020 Electrical Theory is designed to meet the 8 hours of Continuing Education Units (CEUs) requirement for electrical license renewal in New Mexico and many other states. Includes practice review questions and answers.

The course curriculum covers:

  • Ohm’s Law and Voltage Drop
  • General Lighting and Receptacle Calculations
  • Range and Dryer Calculations
  • Fixed Appliance Calculations
  • Sizing Grounding Conductors
  • Motro Calculations
  • Generator Calculations
  • Welder Calculations
  • Transformer Formulas & Calculations
  • Miscellaneous Commercial Calculations
  • Residential Service Calculations

Please Note:

  1. Not all of the states that have approved our Continuing Education courses for a classroom setting have approved them for our online electrical courses distribution. Be sure to select the online course approved for your state on the Digital Chalk website.  We are in the process of submitting applications to every state that will accept Continuing Education online.  NOT ALL STATES WILL ACCEPT ONLINE TRAINING FOR Continuing Education.
  2. If you need Continuing Education for more than one state please contact our office for multiple certificates since each state has unique requirements and fees and course costs may vary.

* Depending on the state, additional registration and proctoring fees may apply.

Workbook

NEC 2020 Exam Prep and Continuing Education Study Guide

NEC2020 Electrical Continuing Education and Exam Prep Workbook. Bobo Technologies.This is a 352-page workbook designed to work in conjunction with Bobo Technologies’ Continuing Education and Electrical Exam Prep workshops and is also an excellent independent study tool.

This comprehensive workbook contains approximately 80 hours of home study material with over 1,000 Code questions and answers and over 650 practice calculation questions and answers.  Also highlighted are significant changes in the NEC 2020.

News & Updates

$50 Off
Your Next Exam Prep Class!

We would like to thank all of our customers who have been with us over the years, as well as our new customers, with $50 off your next “Live Online” Exam Prep Class.

Click Here to get your $50 off Promotion Code.

Private Tutoring Now Available!

    • One on one time with Larry Bobo to get your specific questions answered.
    • Time is charged hourly.
    • Discount for previous students.
    • Connect live, online, meet from anywhere.
    • 1 or 2 people, split the cost with a friend/co-workier.
    • Contact Larry directly to set up a day and time.

Contact Larry

Contact Us

(719) 488-2632

P.O. Box 951
Palmer Lake, CO 80133

 

Krista Bobo

Larry Bobo

We Like Hearing From Our Students

Bobo Technologies
Verified by MonsterInsights